| 1. | Design of the automatic optic microscope and image acquisition system
显微镜自动载物台及图像采集自动化研究 |
| 2. | Scanning fiber - optic microscope
扫描光纤显微镜 |
| 3. | The thickness obtained from the phase change heat is consistent with the one obtained from the optic microscope
用相变热得到的微胶囊的壁材厚度与显微镜测得的微胶囊的壁材厚度相一致。 |
| 4. | The microstmcture and crack propagation manner of the fracture specimens have been observed using scanning electron microscopy ( sem ) and optics microscope
Mo层对裂纹具有明显的偏转作用， tz - 3y20a mo叠层材料表现出一种非脆性开裂的特征。 |
| 5. | Optics microscope and pc connected by industry video camera of high resolution power , relied on specialized analyses soft to complete fiber diameter test
是通过高分辨率的工业摄像机将光学显微镜与计算机相连，依靠专业的分析软件来完成纤维直径的测试。 |
| 6. | 2 . observing by optics microscope and electron microscope show that : the skin muscle is being received on his epidermis muscle and alimentary canal destroyed after the soil is polluted by the four kind of pesticides
光学显微镜和电子显微镜观察表明：赤子爱胜蚓从表皮肌肉到消化道上皮肌肉在受到农药污染后受到破坏。 |
| 7. | Electrorheological fluids based on metal and silica particles dispersed in silicone oil respectively are observed by means of an optic microscope . the fractal theory is adopted to characterize phase separation of electrorheological fluids and the fractal dimension ( df ) of an electrorheological fluid of 10 % particles in silicone oil is determined as 1 . 78
仿真结果表明，电流变体的电致成链过程可分为三个阶中文摘要段，即快速生长阶段，缓慢生长阶段和稳定阶段；在成链过程中，小尺寸的微粒链和大尺寸的微粒链分别是流体的结构和其稳定性的重要决定因素。 |
| 8. | Copper - nanosized tibi composites were prepared by in - situ process . the microstructure , mechanical and electrical properties , and dry sliding wear behavior and electric sliding wear of cu - nanosized tib _ 2 in - situ composites was investigated ; mostly task as follows : the thermodynamic data for the reactions between b and ti in the molten liquid of copper were analyzed , the copper matrix composites reinforced by in - situ tibi nanoparticles were prepared by reactions of 8263 , carbon and titanium in copper - titanium melt , and copper - titanium , copper - boron in alloy melt , respectively , which controlled the reaction temperature , reaction time and solidification process . the rnicrostructure and mechanical and electrical properties of the in - situ composites were investigated by using optics microscope , tem and xrd
本文采用原位反应法制备了cu -纳米tib _ 2原位复合材料，在此基础上分析了原位复合材料的微结构，进行了干滑动摩擦磨损和电接触滑动磨损实验，完成的主要工作如下：从热力学的角度出发，分析了陶瓷tib _ 2颗粒在铜基体中原位生成的热力学条件，并用电解铜、工业纯钛、 b _ 2o _ 3 、 c (还原剂)以及cu - ti 、 cu - b等合金为原料，通过控制适当的反应温度、反应时间和快速凝固等工艺手段，制备了cu -纳米tib2原位复合材料。 |
| 9. | The explosive welding specimen were also annealed in vacuum at various elevated temperature from 1000 to 1300 . optic microscope , sem , tem and eds ( electron diffraction scattering ) techniques are applied to observe the microstructure and the element profiles of the welding interface and the interdiffused layer , reveal the interdiffused performance of alloy elements at elevated temperature , and analyze the structure and composition of the precipitated phases . moreover , the tensile strength of welding line with the two different techniques and various welding parameters were carried out
采用金相、扫描电镜、透射电镜、能谱等多种实验手段对焊接结合层的微观组织结构、高温下nb - 1zr与不锈钢合金元素的互扩散行为，形成的互扩散层的成分、金相组织和扩散层中的析出相的相组成和相结构等，都进行了较为详细的分析，并且对在不同工艺、不同焊接参数下焊接的nb - 1zr合金和不锈钢的焊缝做了强度实验研究。 |
| 10. | Among 12 b - all patients there were two cd10 + , five cd19 + , two cd20 + and two hla - dr + . anti - cd3 and anti - cd4 dots of one patient showed significant difference using optics microscope observed . these cells were characterized by regular shape with dense chromatin on the anti - cd3
淋巴瘤病人胸水中有大量幼稚淋巴细胞，其中3例cd3 、 4例cd4 ，属t细胞淋巴瘤， 3例cd19 、 7例cd20 、 3例cd22 ，属b细胞淋巴瘤，阳性点上的细胞与非阳性点上细胞无论在细胞数量、细胞大小、形态规则性上都有明显的不同，用显? 2 ?微镜观察更是明显。 |
